HAKKO AIR PUMP 40L

Hakko Instuction Manual

Read the rest of this entry »

Maximum 2 Acres. 1/3hp, 115v piston, oil-free compressor with self-cleaning CoActive AirStations

AIR ONE

• QUIET-AIR METAL LOCKABLE CABINET WITH GFI SYSTEM AND COOLING FAN
• 2.5 CFM
• CO-ACTIVE AIR STATION – TWO FLEXIBLE EPDM MEMBRANE DISKS C/W BASE
• 9″ MICRON BUBBLE DIFFUSER DISK WITH 3/4″ MPT THREAD

AIR ONE PLUS:

SAME AS AIR ONE SYSTEM, BUT WITH TWO AIR STATIONS, EACH WITH A SET OF TWO MICRON BUBBLE DIFFUSER DISKS ON TWO BASES, PLUS A MANIFOLD FOR THE TWO DISK SYSTEM.

Maximum 4 Acres. Dual stage 1/2hp, 115v piston oil-free compressor with (2) self-cleaning CoActive AirStations™

• CO-ACTIVE AIR STATION – 4 FLEXIBLE EPDM MEMBRANE DISKS C/W BASE
• 4.3 CFM
• 9″ MICRON BUBBLE DIFFUSER DISK WITH 3/4″ MPT THREAD
• DOUBLE OUTLET MANIFOLD
• 5 YEAR AIR-STATION WARRANTY  AND 2 YEAR COMPRESSOR WARRANTY

Maximum 7.5 Acres. 1/2 hp, 115/230v piston compressor (35 psi) with three self cleaning CoActive AirStations™

• CO-ACTIVE AIR STATION – 2 FLEXIBLE EPDM MEMBRANE DISKS C/W BASE
• 4.3 CFM
• 9″ MICRON BUBBLE DIFFUSER DISK WITH 3/4″ MPT THREAD

http://www.vertexwaterfeatures.com/sites/default/files/Air-3-XL2.pdf

Skimmers are designed to eliminate water quality problems and reduce maintenance by removing unwanted debris, including protein film, from the surface of the pond before it has time to sink, reducing unnecessary maintenance. A skimmer removes debris before it gets to the pump, it acts as a pre-filter reducing pump maintenance and makes access to the pump quick and easy.

There are 4 different sizes of skimmers:

Model: Signature Series™ 200 Pond Skimmer
Dimensions: 20″ L x 17.5″ W x 17.5″ H
Pond Size: up to 200 sq. ft.
Pump Flow Rate: up to 3,000 GPH / 11,360 LPH

Model: Signature Series™ 400 Pond Skimmer
Dimensions: 21.5″ L x 18″ W x 21″ H
Pond Size: up to 400 sq. ft.
Pump Flow Rate: up to 4,000 GPH / 15,140 LPH

Model: Signature Series™ 1000
Dimensions: 21″ L x 22″ W x 26.5″ H
Pond Size: up to 1,000 sq. ft.
Pump Flow Rate: up to 10,000 GPH* / 37,850 LPH

* Note: The Tsurumi 12PN and AquascapePRO® 10000 pumps are too large. Multiple pumps can be used to achieve up to 10,000 gallons per hour.

The Grande Skimmer handles up to two 10,000 gallon gph pumps. Skimmer includes a lid, debris net, rack and fittings.

Model: BioFalls® 1000 Filter
Dimensions: 17.5″ L x 20.5″ W x 17″ H
Filter Ponds: up to 1,000 gallons / 3,800 liters
Pump Flow Rate: up to 3,000 GPH / 11,400 LPH

Model: Signature Series™ BioFalls® Filter 2500 (2″ Bulkhead)
Dimensions: 24″ L x 29.5″ W x 20″ H
Filter Ponds: up to 2,500 gallons / 9,500 liters
Pump Flow Rate: up to 5,000 GPH / 18,900 LPH

Model: Signature Series™ BioFalls® Filter 6000 (2″ Bulkhead)
Dimensions: 40″ L x 45″ W x 29.5″ H
Filter Ponds: up to 6,000 gallons / 22,700 liters
Pump Flow Rate: up to 15,000 GPH / 56,800 LPH

Model: Signature Series™ BioFalls® Filter 6000 (3″ Bulkhead)
Dimensions: 40″ L x 45″ W x 29.5″ H
Filter Ponds: up to 6,000 gallons / 22,700 liters
Pump Flow Rate: up to 15,000 GPH / 56,800 LPH

Read the rest of this entry »

A Liquid Extract of Barley Straw Especially Helpful Where Bottom Drains Are Present

• Goes to work on contact, releases decomposition by-products immediately
• Not harmful to aquatic life, plants, humans and pets
• One capful is equal to a multiple of barley straw bales, No messy residual
• Can be used all year round

AquaSurge™ Pumps are ideal for use as a high flow pump. The unique design allows the pump to be used vertically or horizontally. The asynchronous motor design ensures the impeller spins in only one direction; maximizing performance, reliability, and minimizing electrical consumption.  All Aquasurge Pumps come complete with a  Limited 3 year warranty.

• Extremely energy-efficient, saving hundreds of dollars over traditional water pumps
• Asynchronous motor technology provides high torque, trouble-free performance at higher head heights
• Oil-free design prevents pond contamination
• Provides years of trouble-free operation’ made for continuous use
• Will not corrode or rust
• Rubber feet reduce noise and vibration
• Can be used vertically or horizontally
• Plumbing adapter fittings included (threaded coupler, 90 degree elbow, 1 1/2″ discharge,  and 20′ power cord)

The Aquasurge Pro adjustable flow pumps are ideal for use in Pondless® Waterfall applicatons, allowing the falls to be adjusted or turned on and off with a remote when desired

• Allows you to customize and fine-tune the flow of waterfalls and streams
• Ability to adjust the flow makes it easy to select the right pump for any application
• Each remote and receiver are paired together with a unique frequency
• Available in  2000-4000 gph volume, and 4000-8000 gph volume.

Tsurumi pumps are world-renowned for their quality, dependability and performance. This line of pumps has been designed to be hydraulically “dialed” into the typical lower head water garden applications. This helps ensure that the pump is performing in its ideal operating range resulting in less vibration and wear and tear on the pump, ultimately resulting in longer pump life. They are available in both the horizontal (PL) and the upright (PN) styles

Tsurumi Pump Chart

Tsurumi Pump specs

• Max Flow Rate – 11,500 gph
• Hydraulic design allows the pump to be operated with as little as 1-ft of head
• Best Efficiency Point- 7,000 gph @ 11 ft of head
• 3-inch discharge makes it Interchangeable with AquascapePRO™ 10,000
• Durable cast iron volute, stainless housing and fiberglass reinforced plastic cap
• Excellent energy efficiency in its class – 1032 Watts = $75.29/mo operating cost*
• Compact and light-weight – 15” H x 11 5/8” W x 7 11/16” and 31.9 lbs
• 2-Year Warranty

Symptoms of Lake Stratification

• Excessive plant and /or algae growth
• Large and/or chronic fish kills
• Muck accumulation along the bottom & shoreline
• Foul odors (hydrogen sulfide gas) bubbling to the surface
• Cloudy or murky water leading to a loss of water clarity
• Poor fishing with fewer desirable species
  The Causes . . .
• Low oxygen levels
• Stagnant water/poor circulation
• Temperature / oxygen stratification
• High nutrient levels
• Hydrogen sulfide & carbon dioxide gases
• Low levels of beneficial bacteria

• Self-weighted hose = faster, easier installations.
• designed to sink to the bottom of your pond without additional weight
• The black color easily disguises it on the pond bottom
• PVC composite = no dangerous lead in the eco-system.
• Flexible under any conditions.
• Heavy duty wall thickness for protection against cuts, crushing by ice in winter, etc.
• Available in 3/8″, 1/2″ and 5/8″ ID.

The magnet is the part that moves back and forth with the diaphragm. It holds the diaphragm secure and vice a versa. Typically the magnet is very long lasting. However if you run the air pump with bad diaphragms for extended periods you could wear down the magnet. If you open the motor for repair and you find dust or small metal particles you may need to replace the magnet. Always inspect the magnet for wear and tear when you replace your diaphragms. They are very easy to replace.

These bubble disc diffusers are made of high-strength polypropylene with 3/4″ MNPT connections. The design of the EPDM membrane, with its engineered thickness taper, results in full utilization of the membrane surface, even at low airflow operations. This results in improved oxygen transfer efficiency, along with maximum operational flexibility.

Note: Diffusers are also known as airstones.

This durable hose can be buried under the soil without fear of the hose being crushed. Use a pvc primer and glue to glue fittings on the hose. The hose comes in a variety of lengths, from 25′ to 100′ long. Hose Sizes:

• 1″
• 1.25″
• 1.5″
• 2″
• 3″

The Aquascape Pond Kit (small) comes complete with everything you need to build a beautiful ecosystem pond in your yard or landscape. All necessary components are provided in a convenient, all-in-one kit that takes the guesswork out of purchasing individual components.

Kit Incudes:

• New Signature Series 400 Pond Skimmer
• BioFalls 1000 Filter with Rock Tray and BioBalls
• AquaSurge 3000 Water Pump
• Automatic Water Treatment Dosing System for Ponds
• 25 feet of 2″ Flexible PVC Pipe
• 12 Feet x 15 Feet 45 mil EPDM Fish-Safe Pond Liner and Geotextile underlayment
• Pump Check Valve Assembly, all necessary fittings, silicone sealants and installation kit
• Welcome starter kit – maintenance treatments, instructions, support materials, video demonstrations and USB manual
• Staple Fish Food pellets

Let Aqualine create a customized pond kit to suit your own project. Tell us what your pond and streambed dimensions will be, and we will assemble the materials you will require.

One of our most popular water kits that features a beautiful disappearing waterfall is the Pondless® Disappearing Waterfall kit. The Aquascape Pondless® Waterfall system gives all the beauty, sights and sounds of water without the pond portion. This style of water feature is popular with individuals who have space constraints, small children or municipality restrictions. The kit includes:

• Waterfall Spillway – This is the starting point of your waterfall
• Pondless® Waterfall Vault – Provides access to your pump and allows you to check the water level in the system
• (2) Small AquaBlox® – provides water storage for reservoir
• AquaSurge® 2000 waterfall pump
• 25 feet of 1 1/2 ” quality Kink-Free hose
• 10′ x 12′ Pond Liner made from quality EPDM 45 mil fish safe rubber – 20-year guarantee!
• 105 sq. ft. of Geotextile Underlayment – protects liner from sharp objects
• Welcome Kit – printed material, USB manual, video and instructions

Manufactured using recycled materials, the AquaBlox Water Matrix module is a lightweight structure that provides area or void space for various water storage projects. The small Aquablox will provide enough space to store 17 gallons of water and can easily support the weight of ornamental rocks and gravel. The AquaBlox™ Small Water Matrix®  is 26.5″ X 16″ X 9.5″, and comes complete with a top and bottom, two sides and four structural supports.

Manufactured using recycled materials, the Large AquaBlox Water Matrix module is a lightweight structure that provides area or void space for various water storage projects. The large Aquablox will provide enough space to store 32 gallons of water and can easily support the weight of ornamental rocks and gravel. The AquaBlox™ Large Water Matrix®  is 26.5″ X 16″ X 9.5″, and comes complete with a top and bottom, two sides and four structural supports.

The large Snorkel Vault and Centipede system is designed for filtering large ponds or pondless systems.

The extension is used to extend the Snorkel Vault to enable placement in a deeper pond.

The Centipede module attaches to the large Centipede Vault, and enables water collection from a greater area.

Check Valves are used to connect the pump to the hose. When the pump is shut off, the check valve keeps the water from draining out of the Biofall, as it is essential that the Biofall remain wet inorder to maintain the aerobic bacteria colony in the biofall.

Check Valves are available for the following pump outlet sizes:

• 1.5″
• 2″
• 3″

Benefits of Reusing Rainwater

Why let good water go to waste when you can reuse it for another purpose? The benefits of harvesting rainwater are numerous, but some of the more prominent advantages include:

• Reduce water bills including city storm sewer charges
• Alleviate demand on municipal systems
• Avoid strict watering schedules
• Improved landscape growth
• Reduce flooding and erosion
• Efficient use of a valuable resource – water

Did You Know

• One inch of rainfall on a 2,000 square foot residential roof generates 1,250 gallons of water that can be reused.
• That same roof in a region receiving 30 inches of annual rainfall generates 41,000 gallons of reusable water.
• The average U.S. household with a 10,000 square foot lot uses up to 3,000 gallons of water weekly for landscape irrigation.
• Running a sprinkler for 2 hours can use up to 500 gallons of water.
• Seventy percent of water used at home is used outdoors.
• 66,175 gallons of water are used outdoors per household, per year.

Place the Downspout Filter under the end point of your eavestrough so the water runs into the filter. The filter will filter out debris off of your roof, to prevent it from running into your water storage area.

The Downspout filter is connected to your underwater storage area.

The Booster Pump is used to transfer water from your water storage area to your garden, flower bed, or lawn, wherever you choose to water. The pump Booster comes in 2 sizes:

1/4 hp Booster Pump

1/2 hp Booster Pump

• Light output is equivalent to a 10-watt halogen light
• 40,000 hour bulb life
• Features a powerful 1-watt LED diode
• Natural warm color light output 3000K
• Integrates easily with other quick-connect 12 volt components
• Limited five-year full replacement warranty

Aquascape Garden and Pond Light Kit includes everything needed to create a beautiful nighttime focal point in any water garden or traditional landscape. The small compact design allows for installation in even the tightest spaces. Kit includes:

• Three pre-wired 1-watt LED injected molded lighting fixtures
• 6-watt /12 V transformer
• Automatic on/off photo cell with integrated timer
• Limited five-year full replacement warranty
• Features a powerful 1-watt LED diode – Light output is equivalent to a 10-watt halogen light
• 40,000 hour bulb life

The 45 ml fish-safe EPDM pond liner leads the industry in quality and reliability.

• Easy and inexpensive to install.
• Won’t crack like concrete.
• Rugged and flexible.
• 20 year warranty.
• Exception resistance to solar UV light, ozone and oxidation
• Cover with rocks and gravel to expand the life expectancy indefinitely.
• Can be repaired if it is punctured or torn.

Liner rolls are available in the following sizes:

• 10 x 100
• 15 x 100
• 20 x 100
• 25 x 100
• 30 x 100
• 40 x 100
• 50 x 100

45 mil EPDM Fish Safe Liner –

• Protect your liner by installing a barrier fabric underneath it, to protect sharp rocks and other objects from puncturing the liner.
• This soft, non-woven geotextile made from polypropylene will last 20+ years under your liner.
• Comes in a 15′ width, and can be cut to any length.

Note: The underlay fabric will wick water from your pond to the ground if you are installing it OVER your liner and if it is allowed to touch the surrounding soil.  Always ensure that the edges of the geotextile do not come in contact with the surrounding soil when you are using it under this circumstance.

Protect your liner by installing a barrier fabric on top of the liner to protect sharp rocks, animal hoof puncture and other objects from from puncturing the liner.  We recommend ‘sandwiching’ your liner by using the underlayment fabric beneath the liner, and the overlay fabric on top of the liner. It is very difficult to find a puncture or a leak in your pond AFTER you have added all the rocks to the pond.

• This geotextile will last 20+ years over your liner
• Material is light weight and will float in water if it is not weighted down.
• Comes in a 12′ width, and can be cut to any length.

The Aquascape Dual Union Check Valve provides a professional pump and plumbing connection inside the skimmer filter system, as well as the Pondless Waterfall vaults. The heavy-duty swing style  check valve flapper maximizes water flow through the valve when open, while preventing the back flow of water  when the pump is shut off or during a power outage. Union connections on both sides of the valve make pump  and filter  maintenance quick and easy without the use of tools. A set of reversible fittings takes the guess work of finding the right pump or filter fitting and allows the extension of valve height for the taller filter applications. Choose from either a 2″ Dual union check valve or a 3″ CVA check valve.

A bubbler fountain creates the soothing sound of trickling water making it the focal point of any setting. Incorporate the sight and sound of water to your garden, deck, patio or balcony.

• Light weight and durable.
• Can be used indoors or outdoors.
• Never fades or chips.
• Natural rock veneer. Ages like real stone.
• Small- 17.75″ diameter x 18″ H. Medium- 13″ diameter x 24″ H. Large- 9″ diameter x 30″ H.
• Pump and basin sold separately.

The Evolution Series fountain was developed from three basic ideas: simple to assemble and maintain, low cost to operate, and patterns that look great. This evolution of ideas brought about a fountain that has four main parts (float, suction screen, throat, and motor), a cost to operate of approximately five cents per hour, and spray patterns that rival most large scale fountains.

The high quality plastics, stainless steel motor and fasteners used in the Evolution Series fountain will give many years of reliable service.

This black polyurethane waterfall foam is ideal for filling joints and gaps between rocks and boulders maximizing the amount of water cascading over the waterfall and rushing down the stream. It sets within an hour and can be readily hidden by sprinkling pea gravel or sand over the foam while it is still slightly damp. It has some flexibility which accomodates the shifting of the rocks and ground structure over the winter.

Comes in a DIY can, or in the “Professional” size can which requires the use of a Foam Gun applicator.

Used for sealing connections where liner attaches to the BioFalls® Filter snout and the skimmer faceplate.

KEEPS PONDS CLEAN & CLEAR! Bacteria are important to maintain clear water in your pond.

• Seeds and maintains biological filters
• Reduces ammonia nitrogen levels and dissolves away organic sludge
• Breaks down dead algae
• Improves dissolved oxygen levels
• Effective over a wide range of pH conditions
• Continued biological activity even in water temperatures under 55^oF. (12^oC.)
• Available in quart/litre and 1 gallon size.

Autumn coloured waterlily

• Orange center with pink tips
• Flower is cup shaped standing 8in above the water
• Mottled leaves
• Spread 6-7 feet
• Day blooming

Vivid Red Tropical Lily

An almost glowing lavender blossom.

• Day blooming
• Striking violet-blue with gold center cup shaped blooms 8in high
• Dark green and purple mottled leaves
• Spread 6-7 feet

One of the few Green blossomed lilies. An amazing flower by even jaded gardeners standards. Rarely are the colours depicted accurately in photographs.

• Day blooming
• Pale green with smoky blue tips flat blooms 6-8in high
• Lightly speckled green leaves
• Spread 5-6 feet

A vibrant pink flower.

• Day blooming
• Raspberry red with yellow center bowl shaped blooms 6-8in high
• Green and purple mottled leaves
• Spread 5-6 feet
• Blooms abundantly

A pale, pastel purple.

• Day blooming
• Raspberry red with yellow center bowl shaped blooms 6-8in high
• Green and purple mottled leaves
• Spread 5-6 feet
• Blooms abundantly

An amazing, many petalled flower.

• Day blooming
• Deep blue, double petal, flat shaped blooms 4-6in high
• Solid green leaves with purple underside
• Spread 4-5 feet

A prolific bloomer, with a full cup of petals.

• Day blooming
• Sky blue cup shaped blooms 4-6in high
• Green leaves speckled with purple
• Spread 6-10 feet

A purple thats almost iridescent in the summer sunlight.

• Day blooming
• Deep plum with yellow center bowl shaped blooms 6-12in high
• Green leaves speckled red
• Spread 5-6 feet

• Blooming Time: Day
• Flower Description: 6 to 7″ rich yellow center with lighter yellow outer petals; stellate shaped flowers; inner petals are dark pinkish red; very sweet fragrant
• Leaf Description: 8 to 9″ dark green leaves; new leaves have small purple specks and blotches; spread of 3 to 5′; produces an abundance of leaves – may hide flowers
• Comments: Free flowering; good cut flower; use in medium and large water gardens; tolerates partial shade

• Blooming Time: Day
• Flower Description: Salmon-pink flowers
• Leaf Description: Spread of 4 to 6 feet; mottled leaves
• Comments: Medium to large water gardens; needs full sun; free flowering

• Blooming Time: Day
• Flower Description: 5 to 6″ orange flowers; changeable color: yellow apricot (first day) to gold orange (second day) to deep orange with yellow tips (third day); cup-shaped changing to stellate; good fragrance; flowers held above water surface
• Leaf Description: 12″ green leaves; new leaves are bronzy with some purple spots; spread of 4 to 5′
• Comments: Free flowering; subject to crown rot; use in medium to large water gardens

• Blooming Time: Day
• Flower Description: 7 to 8″ flower with deep red inner petals and white outer petals that become pink; inner deep red petals may burn with hot temperatures; slightly fragrant
• Leaf Description: 10″ deep green leaves; new leaves are slightly bronzed; spread of 5′
• Comments: Very free flowering; use in medium to large water gardens

• Blooming Time: Day
• Flower Description: Peach flowers; 4 to 5 inches across
• Leaf Description: Lightly mottled leaves
• Comments: Ideal for small water gardens and tubs; free flowering; a Kirk Strawn hybrid

• Blooming Time: Day
• Flower Description: Blend of yellow and pink
• Leaf Description: Medium spread; green leaves with purple blotches
• Comments: Free flowering

• Blooming Time: Day
• Flower Description: Bright yellow flowers held above the water; light fragrance
• Leaf Description: Green leaves lightly speckled with brown
• Comments: Free flowering; medium to large water gardens

• Blooming Time: Day
• Flower Description: Rich fuchsia flowers
• Leaf Description: Medium to large spread
• Comments: Best in large water gardens

• Blooming Time: Day
• Flower Description: Light Peach color
• Leaf Description: Green leaves with a mottled brown underside; leaf span has a 5 – 7 foot spread
• Comments: Tolerates partial shade

• Hardiness: Zones 7-11
• Height: 4 to 6
• Flower: N/A
• Foliage: N/A
• Comments: Can be grown in up to 6 inches of water during the summer; gradually introduce to aquatic life; full sun in 5 gallon pot; rich soil; remove from water garden in fall and store rhizomes indoors
• Cultivars/Species: Ra (yellow); Taney (burnt orange; white edged leaves); Endeavor (red, purple brown edged leaves); Erebus (salmon pink)

• Hardiness: Zones 7-11
• Height: 4 to 6 feet
• Flower: N/A
• Foliage: N/A
• Comments: Can be grown in up to 6 inches of water during the summer; gradually introduce to aquatic life; full sun in 5 gallon pot; rich soil; remove from water garden in fall and store rhizomes indoors
• Cultivars/Species: Bengal Tiger (orange flowers; yellow striped leaves)

• Hardiness: Zones 5-11
• Height: 6 feet
• Flower: Small violet flowers on 8 inch panicle carried high above the foliage
• Foliage: Thick ovate to lancelolate blue green leaves dusted with white powder; edged in purple
• Comments: Plant in 12 to 18 inches of water over the crown; plant in 5 to 20 gallon tubs
• Grow in full sun to part shade
• Cultivars/Species: N/A

• Hardiness: Zones 3-9
• Height: 10 feet
• Flower: Cylindrical flower in mid to late summer; good fresh or dried in arrangements
• Foliage: Sword-like flat, gray green, leaves arise form plant base; leaves turn bright yellow in fall
• Comments: Spread by rhizomes; can take over a small area; can be grown in containers; native to marshes and wetlands
• Cultivars/Species: Variegata

• Hardiness: Zones 4-10
• Height: 18 inches
• Flower: Blue to violet flowers in summer
• Foliage: Much branched, succulent, square stems; dark green oblong leaves
• Comments: Plant in 1 to 2 gallon containers; rich soil; cover with .5 to 2 inches of water
• Cultivars/Species: N/A

• Hardiness: Zone 9; normally grown as a container plant
• Height: 12 to 36 inches
• Flower: Flat, leaf like bract produce at top of stem; rays radiate stiffly from the center
• Foliage: Leafless stem topped with spiral of dark green pendulous leaves and greenish brown flower spikelets
• Comments: Light to partial shade; can be used in water gardens or as a houseplant; keep moist or grow in
• standing water; spreads by rhizomes but is easy to manage
• Cultivars/Species: N/A

• Hardiness: Zones 9-10; normally grown as a container plant
• Height: 10 to 15 feet
• Flower: Large, onion like 1 foot inflerences in summer; long bracts form arching sprays
• Foliage: Produces strong leafless stem
• Comments: Sun to partial shade; can be used in water gardens or as a houseplant; keep moist or grow in
• standing water; spreads by rhizomes; plant in 20 gallon pot
• Cultivars/Species: N/A

• Hardiness: Zones 4-11
• Height: 18 to 24 inches
• Flower: Soft blue flower spike appears from a leaf bract at top of stem
• Foliage: Glossy, erect, deep green leaves; slightly heart shaped with distinctive swirling
• Comments: Grows in shallow water (up to 18 inches covering the crown); sun to partial shade; can be grown in 5 gallon tub; thick creeping rootstock
• Cultivars/Species: Alba (white flowers); P. cordata var. lancelolata (narrow leaves and longer flower spikes; ht. 4 to 5 feet); Angustifolia

• Hardiness: Zones 4-9
• Height: 18 inches
• Flower: N/A
• Foliage: Contorted to corkscrew, dark green needle-like leaves
• Comments: Grow with 1 to 6 inches of water over crown; grow in 2 gallon container; sun to partial shade
• Cultivars/Species: N/A

• Hardiness: Zones 3-11
• Height: 3 to 6 feet, spread – 24″
• Flower: N/A
• Foliage: Stems dark green with alternating bands of green and cream.
• Comments: Sun to partial shade; plant in depths to 12″ or in wet soil;
• Grow in 2 to 5 gallon container; remove all green stems as they occur
• Grow in full sun to part shade
• Cultivars/Species: N/A

• Hardiness: Zones 7-11; normally grown as a container plant
• Height: 18 to 36 inches
• Flower: Flat, leaf like bract produced at top of stem
• Foliage: Leafless stem toped with spiral of dark green leaves
• Comments: Sun or light shade; can be used in water gardens or as a houseplant (container on tray of water);
• keep moist or grow in standing water; prefers fertile soil; sun and wind can brown the bracts; plant in 2 to 5 gallon pot; grow with 1 to 6 inches of water covering the crown
• Cultivars/Species: Variegatus (white striped leaves, bracts, and stems); Gracilis ( compact; 18”); Nana (dwarf)

• Hardiness: Zones 5-11
• Height: Less than 1″
• Flower: Not showy
• Foliage: Lacy bright green fronds that turn reddish in full sun, forming multilayer free-floating mats 4 cm thick
• Comments: Leaves normally not eaten by fish; overwinter indoors; naturalized in shallow ponds, ditches and sluggish streams. The sporophyte of Azolla caroliniana commonly survives throughout the year in temperate areas (with hard frosts and prolonged ice cover). It is the best adapted of all species for subsistence on mud.
  

• Hardiness: Zones 5-10
• Height: Floating on surface
• Flower: Short-lived papery, nonfringed, golden yellow flowers
• Foliage: Round, slightly dentate, glossy leaves
• Comments: Vigorous; can be aggressive; plant in 1-gallon containers; cover with 12 to 24″ of water; full sun
• Cultivars/Species: N/A

• Hardiness: 5-11
• Height: 6″ – 12″
• Foliage: Small leaves in whorls; aerial foliage have a deeper blue-green color, red stems
• Comments: Often used in aquariums as an oxygenator; submerged plant but will root and develop aerial foliage in shallow water;
• obtains nutrients directly from water; soil planting not necessary
• The larger variety Myriophyllum Aquaticum can become invasive and is being removed from many suppliers availability list.
  

• Hardiness: Zones 8-11
• Height: 6″
• Flower: Pale blue to lavendar flowers with yellow spots on 6″ spikes
• Foliage: Balloon-like petioles swollen with spongy tissue; rosette of pale green, shiny, rounded leaves
• Comments: Requires abundant sunlight and warm temperatures; long feathery dangling roots;
• Varieties: Dwarf Hyacinth – grows to 6″ – 10″ in height; Florida Native Hyacinth – grows to 12″ – 18″ in height in Alberta 
• Invasive in warmer climates
• 

• Hardiness: 8 – 11
• Height: 10″
• Flower: Inconspicuous white flowers
• Foliage: 10″ rosette of velvety soft green, deeply veined leaves; whitish green on the underside, Feathery roots; 
• Comments: Prefers shady conditions. Needs to be acclimated to outdoor environment when purchasing from a greenhouse. Strong sun and breeze will dry the leaves if not acclimated.
  

• Hardiness: Zones 9-11
• Height: 2- 2.5″ on water surface
• Flower: short-lived light yellow flowers with a red and brown center, borne in abundance; flowers stand above the water
• Foliage: Thick, shiny dark green heart-shaped leaves; 2 to 4″ wide leaves on long, trailing stems
• Comments: Will survive in water up to 12 to 15″ deep, but prefers shallow conditions (6″); prefers rich topsoil; overwinter indoors in shallow tub but keep moist and provide good light

The 17″ wide fine, tangle free skimmer net catches even the smallest debris, making it ideal for quick and easy removal of leaves and other debris. The quick-latch, telescoping handle extends to 35″

• Day blooming
• Blue with yellow-gold centers
• Flat blooms 6-8in high
• Mottled light green leaves
• 7 foot spread

• Day blooming
• White with blue tips star shaped blooms 2-4in high
• Fragrant
• Solid green leaves
• Spread 1-8 feet

• Day blooming
• Yellow/green, with blue tips, flat shaped blooms 6-8in high
• Solid green leaves
• Spread 4-6 feet

• Day blooming
• Pale pink/lavender cup shaped blooms 8-12in high
• Dark green leaves with red underside
• Spread 4-5 feet

• Day blooming
• Light pink double star shaped blooms 6-8in high
• Speckled green leaves
• Spread 6-10 feet

• Night blooming
• Rose red star shaped blooms 4-6in high
• Red leaves
• Spread 5-6 feet

• Day blooming
• Powder blue with purple tips 6-8in high
• Solid green leaves
• Spread 6-10 feet

• Hardiness: Zones 3-10
• Height: 4 to 8 inches, spread 10 – 16″
• Flower: Sky blue, yellow centered flowers May through September
• Foliage: N/A
• Comments: Creeping underground rhizomes, or from seed; forms dense colonies; plant directly in gravel in pond, or in 1 gallon container, in up to 3 inches of water over the crown;  naturalized on banks of still and slow-moving water
• sun to partial shade

• Hardiness: Zones 7-11
• Height: ½” high on surface of water. Flotation is made possible by pouches of air within the leaves.  
• Flower:      None
• Foliage: The stem is floating, filamentous and branched. Sets of 3 leaves form on a stem: 2 small green hairy ones above water and one that serves as the root structure below the water. These small units reproduce rapidly.
• Comments: Salvina blocks sunlight from reaching very far underwater and removes nutrients, which also prevents Algae from developing. 

• Hardiness: Zone 3 – 9
• Height: 9 inches
• Flower: Not showy
• Foliage: Liberally striped cream or white markings
• Comments: Grow in a wide mouth pot; does not grow as rapid as the speciesCultivars/Species: N/A

• Hardiness: Zones 2-11
• Flower: The flowers are white, tinged with pink and are hairy inside. Blooms in early spring
• Foliage: Cluster of 3 lobed leaves growing on a long vine; leaves hold themselves above the surface of the water
• Height:      6″ – 8″ high; floating rhizomes which grow out from the bank, sometimes forming a  thick floating mat.
• Comments: Sun to partial shade; plant in depths to 12″ or in wet soil; vines send out anchor roots that will attach to rocks in pond.

• Hardiness: Zones 3-11
• Height: Grows to a height of about 8” – 20”.
• Flower:      these buttercup relatives have masses of large, golden cup-shaped      flowers
• Bloom time: April and      May.
• Foliage: large, shiny leaves which are round or kidney      shaped. It has smooth, hollow stems coming from coarse, fleshy roots.
• Comments: Like many other members of the buttercup family, the species contains a blistering sap, which can be dangerous.

• Hardiness: Zones 3-11
• Height: Grows to a height of about 12″ – 20”.
• Flower:      None
• Foliage:  Graceful light green and white striped foliage.
• Comments: Excellent plant for helping keep ponds clear as its extensive root system absorbs nutrients in the pond and removes nitrates and phosphates.

This plant is on the Prohibited Invasive Species list in Alberta. Hydrocharis morsus-ranae spreads rapidly by way of long, cord-like stolons, easily giving rise to a floating mat of interconnected plants. It is capable of over-wintering by forming vegetative buds, called turions, located at the base of the plant.  Hydrocharis morsus-ranae has rapid vegetative spread and the ability to form dense mats, which can limit light penetration and fill the water column in shallow areas. In doing so it can strongly affect native aquatic life. It can also inhibit boat traffic and limit recreational activities.

• Hardiness: Zones 6-11
• Height: Leaves float on pond surface, spreads, and will grow in sun or shade
• Flower: none
• Foliage: Leaves resemble a four-leaf clover, and have reddish-brown stripes that splits the darker green on the top half of the leaflets and the lighter green of the lower half.
• Comments: Plant 4 inches to 9 inches below the surface of the water. It also will grow in damp soil. It is cold hardy but will not survive in temperatures below 10 degrees celcius.
•  If crowded, it sends up aerial growth in addition to surface growth

• Hardiness: 5-10
• Height: 6” – 8”
• Flower: none
• Foliage: Trailing vine growth; rounded leaves suggestive of pennies. When iron is low, the leaves will turn yellow at the edges. Overall growth will be slower, and leaf size smaller when nutrients are lacking.
• Comments: Grows well in shade ponds and in waterfalls.
• Massive root system. Can be free floater.

The diaphragms in a Hakko air pump should be replaced every 1-2 years for optimum utilization. The rebuild diaphragm kits are simple to install. They include diaphragms to fix both sides.

Note: If your diaphragms are blowing out frequently, you most likely have an excess back pressure problem in your design. Check that your air delivery hose is large diameter and no kinking is occurring. Check your air diffusers for clogging. Ceramic style air stones need cleaning with muriatic acid every 3 months typically. Check that the number of air diffusers is sufficient to handle the air output of your Hakko pump. Too few diffusers will create excess back pressure.

hakko-diaphragm-rebuild-instructions

It’s Cheaper to Pipe Air than Electric. No power near the pond? No problem. Vertex’s line of Remote Valve Box Systems allows installation of the cabinet wherever it is convenient.

Simply locate the system cabinet where you do have power and deliver the air as far as needed through 1″ PVC pipe. At the shoreline of the pond simply install a Vertex Remote Valve Box to divide the air into separate airlines.This will save the thousands of dollars in unnecessary costs.

http://www.vertexwaterfeatures.com/pond-aeration-systems-and-components

MICROBE-LIFT/Barley Straw Pellets + works in much the same way as barley straw…only faster!  Whereas barley straw works by releasing certain natural chemicals as it biodegrades, so do the pellets in MICROBE-LIFT/Barley Straw Pellets +, only the breakdown compounds are released faster: dispersing equally throughout the water; reacting photochemically with sunlight; and activating humic acids to produce hydrogen peroxide-an oxidizing agent that also helps to keep the water clear-naturally and at a low level of release. The humic acid will also chelate metals such as copper or arsenic.

Read the rest of this entry »

Rubber Membrane Diffusers are considered to be one of the most economical and low maintenance air diffusers available. The rubber membrane has many small holes which expand as air fills the membrane. Medium size bubbles are released. The rubber membrane does not clog like air stones. Little or no maintenance is required. The Matala Rubber Membrane Diffusers are designed to be very low back pressure so you also get the best performance from your Hakko air pump. Read the rest of this entry »

“Oxygen is the most important element for life.  All aquatic life forms require oxygen. From the fish down to the bacteria any body of water has what is called an “oxygen demand”. Of all the essential elements in water, oxygen is also in the shortest supply. The air we breathe is 21% oxygen. Water can only hold about 8 parts per million (mg/liter) or 0.0008% at 20 degrees Celsius. Oxygen does not like water. It does not take long for oxygen to be depleted; it is our job to make sure it is replenished continuously. Our fish depend on us. Read the rest of this entry »

The Kasco Piston Pump Air Compressors are designed and built to meet the demands of continuous-duty, year-round, large aeration applications. Whether run intermittently or continuously, these compressors will deliver reliable and efficient performance day-in and day-out.  Each unit includes a pressure relief valve, vibration mounts, intake air filter assembly, and brass hose fitting for easy implementation into your existing system. Each compressor is oil-less, quiet operation,  6 ft. power cord, thermal overload protection, and a ramped internal valve plate that allows for restart under load after power failures. COMPRESSOR MUST BE USED WITH COOLING FAN

Read the rest of this entry »

• Designed to provide a fine air bubble with the least amount of pressure.
• Base is made of durable plastic and an open port allows filling with gravel to settle.
• Raised design keeps the diffusers performing at an optimal level above the pond bottom.
• Durable, bolted, strain relief attachment ensures that the weighted tubing will not become detached during installation or maintenance.

• Specially designed for removing lake and pond water weeds and free floating debris or plants  as well as digging and pulling stems and roots of lake and pond weeds, slowing or eliminating their re-growth
• Weighing less than 7 lbs, it is light enough to toss 55 feet away.
• Rake head is hollow and can be filled with floating material to make it float, or with gravel or other weighted material to make it dig deeper in the bottom
• Comes in a box that is 2” x 5” x 39″,  has a four section handle that snaps together giving the user up to 11 feet of reach and comes with 43 feet of rope.

Allows precision dispersion of expanding black foam for sealing waterfalls, streams and water features. Must be used with the Professional cans of waterfall foam.

The revolutionary Jenlis Weed Razer™ Express Aquatic Weed Cutter has a unique V-shaped lake weed cutter head with razor sharp blades that are designed to be the most efficient and effective pond tool made to cut or shear almost any type of rooted aquatic vegetation, such as Water Milfoil, lily pads, cattail and pond weeds.   Read the rest of this entry »

Aquascape professional-grade BioFalls® Filters provide the most filtration and highest water flows in the market. Easy to install and maintain. Requires cleaning only once a year. Can be buried to create a stream or raised to be the start of a waterfall. Durable rotational-molded polyethylene ensures maximum strength and withstands whatever Mother Nature can dish out. All Aquascape BioFalls® Filters include a limited lifetime warranty!

Read the rest of this entry »

• Extremely energy-efficient; Quiet
• Simple to use and maintain
• Durable outer housing prevents damage
• Comes complete with winter resistant air line, preassembled check valves and  2 circular weighted air stones

The Apollo Cascade floating fountain is suitable for smaller ponds.  It comes with a pump,  colour changing LED light ring, float,10 metres of cable, and transformer. The spray pattern is approx. 4′ high and is narrow in diameter. Easy installation – simply float it on your pond and plug it in.

• Simple to install and maintain
• Large interior fits a wide range of pump sizes up to 12,500 gallons per hour
• Expandable height allows the Pondless® Waterfall Vault to be used on any size project
• Comes standard for use with the Small AquaBlox®
• Made from durable rotationally molded polyethylene
• Optional Pondless® Waterfall Extensions can be used when creating deeper basins using the Large AquaBlox®

Video #1: Installation of a pondless Waterfall Vault

https://youtu.be/yH3iOxQTKZA

Video #2: Build a Pondless Waterfall:

The wide 12” spillway opening handles flow rates up to 4,000 GPH/ 15,141 LPH.

The wide 22” spillway opening handles flow rates up to 7,500 GPH/ 28,000 LPH.

The Aquascape Waterfall Spillway  make it easy to create a waterfall or stream, providing smooth, consistent, leak-free water flow. As the incoming water rushes in, the water is diffused by strategically positioned internal barriers to create a smooth flow of water. Its durable design allows boulders, gravel, soil, or other creative landscape material to be set directly on top, making it easy to camouflage into the surrounding landscape. The spillway is extremely versatile and can be used in a wide variety of water feature applications where more expensive biological filters are not necessary, including Pondless® Waterfalls. The spillway can also be installed as an additional waterfall or stream onto a new or existing pond. Multiple spillways can be used to design larger, more creative configurations. You can also build the spillway into hardscape walls for a formal waterfall design. Installation is quick and easy, and Aquascape Waterfall Spillways come complete with fittings (2” PVC slip and 1.5” barbed) for trouble-free setup. The Waterfall Spillway is backed by a limited lifetime warranty, ensuring year after year of reliable use.

AquaForce® asynchronous, solids-handling waterfall and filter pumps combine energy efficient performance, high flow rates and ease of maintenance. The AquaForce® protective pre-filter cage allows the pump to be placed directly into the pond. AquaForce® pumps are able to pump solids up to one quarter of an inch, making it ideal for use with external pressure filters or Aquascape waterfalls type filter systems.

• Asynchronous motor technology provides high torque, trouble-free performance at higher head heights
• Easy to maintain providing years of trouble-free operation
• Durable prefilter cage design prevents clogging and reduces pump maintenance
• Oil-free design prevents pond contamination
• Plumbing adapter fittings included
• Also available in an adjustable flow model (4000-8000 gph pump)

• Hardiness: zones 2 – 11
• Height: 30–100 cm (12–40 in.).
• Flower: Pale lilac flowers are borne on wide branches and open between 1pm and 7pm each day. Flowering time: June–September. Blooms profusely, but flowers are short lived.
• Foliage: Most leaves aerial, floating and submerged leaves fairly common in flowing water. Aerial and floating leaves long-stalked, 8–25 cm (3–10 in.) long. Blade ovate, with rounded or cordate base and entire margins. Submerged leaves may have a strap-shaped blade.
• Comments: Natural habitat is in shallow water of lakes, rivers, and brackish water bays especially on grazed shores, ditches, ponds. Sometimes referred to as Water Baby Breath.

• Ultra™ Pumps are the complete solution for small ponds, fountains and water features. This all-in-one kit includes a three-way diverter valve and multi-size hose connection making it adaptable to almost any hose or tubing size. Ultra™ Pumps are ideal for supplying water to run fountains, water features, external filters and spitting ornaments.
• Protective pump input strainer cover and sponge filter prevents debris from damaging pump, thereby reducing maintenance and prolonging pump life
• Included three-way splitter with valve and multi-hose adapter makes the pump simple to connect almost all hose sizes
• “Mag-drive” motor technology makes this pump energy efficient and simple to maintain
• The wide, flat base and rubber feet make the pump stable and reduce vibration
• Available in zes of 400 gph, 550 gph, 800 gph, 1100 gph and 1500 gph models.

The AquascapePRO Medium Pond Kit comes complete with everything you need to build a beautiful ecosystem pond in your yard or landscape.  The kit includes:

• Skimmer: New Signature Series 1000 Pond Skimmer
• Filter: BioFalls 2500 Filter with BioBalls and Rock Tray
• Lighting: Complete LED Lighting Package:
  • (2) 3-Watt LED Spotlights
  • (1) 1-Watt LED Spotlight
  • 60-Watt Transformer with photocell sensor
  • 3-way Quick-Connect splitter and 25 Feet of LVL Extension Cable
• Treatment System: Automatic Water Treatment Dosing System for Ponds (#96030)
• Hose: 25 feet of 2″ Flexible PVC Pipe
• Liner: Quality 45 mil EPDM Fish-Safe Pond Liner – 15 Feet x 20 Feet (300 sq. ft.) – 20-year guarantee!
• Underlayment: Geotextile
• Components: Pump Check Valve Assembly, all necessary fittings and silicone sealants
• Food: Staple Fish Food pellets
• Welcome starter kit
• Two Pump Model Choices of either the AquaSurge® PRO 2000-4000 or the Tsurumi 3PL Pump

A Full-Function, Buffered Water Conditioner. It is very important to use MICROBE-LIFT/Aqua XTreme when adding water to a pond that contains chloramines.  Conventional dechlorinators will detoxify the chlorine in the chloramines but do nothing to the ammonia released from the chloramines. MICROBE-LIFT/Aqua XTreme will detoxify both the chlorine and the ammonia in chloramines.

• Detoxifies Nitrite, Copper & Heavy Metals
• Removes & Detoxifies Chlorine & Ammonia and destroys Chloramines
• Boosts Alkalinity and adds Essential Electrolytes
• Adds A 3-Part Slime Coat Replacer
• Helps to Reduce Stress

MICROBE-LIFT/Sludge-Away speeds the biological removal of slow-to-degrade organic waste matter from aquatic pond bottoms that may become toxic to fish and plant life. As organic solids accumulate on the pond bottom, they begin to break down releasing toxic gasses to the surrounding environment. These gaseous by-products endanger fish, marine life and plants.  It is safe for fish, plants, pets and the environment. MICROBE-LIFT/Sludge-Away may slightly discolor pond water for a short while. Rocks along the edge may darken but will return to their natural color.

Read the rest of this entry »

CrystalClear® OneFix™ utilizes natural bacteria to digest suspended dead organics to help keep the pond balanced and the water crystal clear. OneFix™ is specifically designed to start working the second it hits the water. Use once every two weeks when water temperatures are above 50°F.

Designed for larger ponds and water bodies. Eliminate pond muck and sludge that accumulates at the bottom of your pond with Pond Logic® MuckAway™. The specially formulated strains of beneficial aerobic bacteria in MuckAway™ are designed to quickly digest organic debris like fish waste, leaves twigs, plant decay and organic runoff that accumulate and form pond muck without harming your pond or its inhabitants. By reducing excess nutrients and muck from your pond, Pond Logic® MuckAway™ eradicates pond odors, helps slow weed growth and keeps your pond water clear and balanced. Read the rest of this entry »

Excellent for large water bodies! Restore pond clarity, water quality and pond balance with Pond Logic® PondClear™. PondClear™ contains specialized strains of beneficial aerobic bacteria that digest organic debris that cause decreased water clarity, muck accumulation & pond imbalance. Read the rest of this entry »

One of the best products that we have found for controlling string algae! CrystalClear® D-Solv9™ contains a specifically designed 2x concentrated formula to clear pond water quickly and efficiently regardless of water volume. Results can be seen in as little as 24 hours. D-Solv-9™ can be used in all sizes of ponds, fountains, bubblers and streams. It can be used when fish or plants are present. One ounce of D-Solv 9 will treat 600 gallons of water.  Good oxygenation and filtration is important when using this product. Available in 16 oz or 1 gallon size.

CrystalClear® D-Solv™ is a dry crystal which utilizes the latest cutting edge technology to remove pond owners’ worst pond problem. D-Solv™ cleans within a short period to remove debris, add oxygen and clean the pond from top to bottom. Use CrystalClear® D-Solv™ on waterfalls, streams and rocks in and around the pond. CrystalClear® D-Solv should be applied when the rocks are wet, and then allowed to sit a minimum of 4 hours, or overnight (best). Start your pump in the morning, and the rocks are washed clean! Available in 2 lb, 10 lb and 25 lb sizes.

CrystalClear® RapiClear™ is a flocculant designed to clear cloudy, muddled pond water quickly, usually within 1-3 hours depending on the size of the pond.  CrystalClear® RapiClear™ has unique properties that allow suspended particles in water to attract together and fall to the bottom of the pond where they can be vacuumed out or removed by filtration. The result is an extremely fast clearing of the pond. Available in 16 oz or 1 gallon sizes.

A Spring / Summer Approach to the Proper Organic Balance in Ponds,  which accelerates the breakdown of leaves, twigs, and other accumulated dead organic waste

• Helps to jump start your pond in the spring
• Reduces buildup of dead leaves and residual organic sediment
• Natural nontoxic and noncaustic
• Each box contains: (8) 2 oz. water soluble packets of cellulase enzymes and hyper cellulase-producing bacteria.

Specially Formulated to Safely Color Lakes, Lagoons, Decorative Ponds, Fountain & Water Features a Beautiful Shade of Blue! A product that safely colors water while its enzymes assist the beneficial bacteria in your pond to create a healthy pond environment

• Will not stain birds, fish, pond rocks or most concrete fountains once diluted
• Safe for humans, plants and aquatic life
• Mixes completely in hours

Feed your pond fish MICROBE-LIFT/LEGACY Cold Weather Food (WHEAT GERM) during the colder weather periods of spring and fall when nighttime temperatures can go below 55°F (13°C). When pond water temperatures drop, fish require a highly digestible cool-water diet. Our MICROBE-LIFT/LEGACY Cold Weather Food (WHEAT GERM) formula is made with lesser amounts of protein and wheat germ which is easily digested and also contains a higher level of fats.

Guaranteed Analysis: Crude Protein (min.) – 32%; Crude Fat (min.) 7%; Crude Fiber (max.) 5%; Moisture (max.) 5%; Ash (max.) 8%;  Phosphorus (min.) 1.3%; Copper (min.) 7 mg/kg.

CrystalClear® Vanish™ will immediately remove chlorine that is present in city water supplies. Chlorine is toxic to fish. Left untreated chlorine can cause gill damage and leave fish unable to breath. Use Vanish™ when performing water changes or setting up a new pond. Vanish™ is safe for use with fish, plants, birds or domestic animals that drink from the pond. After 20 minutes, the water will be safe for fish.

MICROBE-LIFT/LEGACY Variety Mix is the answer for how to feed a blend of fruits, greens, carbohydrates, protein, wheat germ and vitamins to your koi and pond fish. It contains 25% of each our most popular LEGACY foods: Summer Staple with Fruit & Greens, Summer Staple, Growth and Energy and Summer Staple with Montmorillonite Clay.

Guaranteed Analysis: Crude Protein (min.)37%; Crude Fat (min.)6.25%; Crude Fiber (max.)4.5%; Moisture (max.)8.5%; Ash (max.)8%; Phosphorus (min.)1.3%; Copper (min.)7 mg/kg.

New generation remote controllable multi-colour lighting to brighten up your pond or garden. The PondMax Pond & Garden Lighting provides safety, simplicity and cost effectiveness. while adding value to either your pond or garden. With different options and sizes available, each fixture provides endless versatility to meet the needs of the most demanding applications.

The RF Remote Control Box offers an easy to use 8 Colour multi-function remote control which can operate the light from up to 10m from the control box. The RF Control Box is needed to operate lights.
You can have up to 8 single colours or a series of flashing or changing modes. To daisy chain these lights, use the light offered without a remote. Comes complete with weighted base and garden spike for use in or out of your pond. Transformer not included. 2 year warranty.

• Cable Length: 5m
• Light Bulb Types: LED colour changing; High Powered LED Warm White
• Fixture Sizes: Small and Large
• Plug and play connections
• Four pin daisy chain connection

Aquascape manual series transformers feature a 6′ cord and durable epoxy sealed housing. A great transformer to use when manual on/off operation is desired. These transformers can be used with all 12v lighting that includes screw on quick connectors. Transformer includes a single quick-connect cable port for adding a light. Multiple light fixtures can be added by using the 3-Way Splitter.  Available in:

• 6 watt – to be used with the 1-Watt 12 Volt LED Bullet Spotlight, 3-Watt 12 Volt LED Bullet Spotlight and the 1-Watt 12 Volt LED Waterfall Light.
• 20 watt and
• 60 watt models

• Repeats programmed schedule daily
• Auto On at dusk / Off at dawn or 4-6-8 hour timer option
• Built-in memory setting in case of power loss
• Integrates easily with other quick-connect 12 volt components
• Up to 60-Watt capacity
• 36″ cord
• Limited five-year full replacement warranty

The 25′ extension cable allows for simple extension of Aquascape lighting.  Ideal for use with our manual 12 Volt transformers and 3-way splitters.

The 25′ Lighting Cable with 5 Quick-Connects – 25-foot cable with 5 quick-connect points (at 5 ft. intervals) allows simple extension of Aquascape LED lighting.

• For use with Aquascape LED lighting system
• No need to cut wires
• Quick-connect system provides weatherproof seal

• Hardiness: Zones 8 – 11
• Height: 6″
• Flower: White frilly flowers
• Foliage: Small circular green or varigated pads float across the surface giving a look of miniature waterlilies
• Comments:  A great surface marginal plant that spreads quickly

• Hardiness: Zones 4 – 11
• Height: 8 – 12″
• Flower: Miniature lavender-pink blooms that attract many butterflies
• Foliage: Bright green leaves can be used in teas and jellies.
• Comments: Spreads quickly, Excellent natural filter planted in biofalls. Grows in sun to part shade.

Duckweed tend to be associated with fertile, even eutrophic conditions. They can be spread by waterfowl and small mammals, transported inadvertently on their feet and bodies as well as by moving water. Duckweed is an important high-protein food source for waterfowl and also is eaten by humans in some parts of the world as it contains more protein than soybeans.The tiny plants provide shelter cover for many aquatic species. The plants are capable of absorbing excess mineral nutrients, particularly nitrogen and phosphates. Duckweed prefer high-nutrient wetland environments, such as sloughs. Often mistaken for algae on a pond. Scoop up some of the plant and if you see tiny little roots – its duckweed.

This plant is only being added as many new pond owners do not know what this is. It grows on rocks and plants, as well as any other surface it can attach itself to. Most pond owners like to eliminate it from their pond, as if it is allowed to grow unchecked, it will envelop plants and fish.

• Hardiness: Zones 3-11
• Height: 8″ – 12″
• Flower: white flowers borne on tall spikes.
• Foliage: The leaves are tall and arrow-shaped
• Comments: Tubers tend to form deep in the soil, which results in a late starting plant in the spring. Often discarded in the spring because it doesn’t show any signs of growth right away. Also known as Duck Potatoe, but rarely eaten by ducks as tubers are buried too deep.

• Extremely energy-efficient; Quiet
• Simple to use and maintain
• Durable outer housing prevents damage
• Comes complete with winter resistant air line, preassembled check valves and  4 circular weighted air stones

A Biofalls Filter provides complete mechanical and biological filtration. Easy to install and maintain. Requires cleaning only once a year. Can be buried to create a stream or raised to be the start of a waterfall.

• Recommended for pump volumes of 3,000 – 7,000 gallons per hour.
• Filters up to 2500 gallons.
• Made from durable rotational molded polyethylene ensuring maximum strength.
• Reversal waterfall lip.
• Expanded surface area filter mats.
• Brass hardware resists corrosion.
• Circular shape provides maximum strength and makes it easy to camouflage into the landscape.

A Biofalls Filter provides complete mechanical and biological filtration. Easy to install and maintain. Requires cleaning only once a year. Can be buried to create a stream or raised to be the start of a waterfall.

• Recommended for pump sizes of 7,000 – 10,000 gallons per hour.
• Filters up to 6000 gallons.
• Reversal waterfall lip.
• Expanded surface area filter mats.
• Circular shape provides maximum strength and makes it easy to camouflage into the landscape. Swirling waterflow action maximizes filtration.
• Can be purchased with either a 2” bulkhead fitting or a 3” bulkhead fitting to accommodate hose sizes.

The Grande Biofalls filter is capable of filtering ponds up to 10,000 gallons. This large, three-stage filtration unit has a huge settling chamber, thick biological filter pads and drawstring nets for biological media (not included). Made of heavy-duty polyethylene construction. Comes with 3″ bulkhead and male flexible PVC pipe adapter.

Especially designed for the Signature Series Microfalls, this tray holds rocks, plants and gravel, helping to naturalize the unit.

A good biofilter needs a lot of surface area with open spaces between for good aerated water flow. A high surface area is useless if the passageways are so small that water flow cannot penetrate.This light-weight versatile product is made of curly, fibre thermo-polypropylene compounds, and is non-toxic to the environment. It is easy to cut and fits in any application. Available in 4 densities:

• MATALA – BLACK Filter grid, low density, best suited for use in skimmers
• MATALA – GREEN Filter Mat, Medium Density
• MATALA – BLUE Filter Mat, High Density
• MATALA – GREY Filter Mat, Super High Density
• Proper Use of Matala